Programmable Three-Phase Digital Voltmeter AMP Current Electricity Meter Ammeter

• Customization: Available
• After-sales Service: Upon Request
• Warranty: Upon Request
• Model NO.: AB-L
• Installation: General Installation Meter
• Display: Digital
• Usage: Standard Electric Energy Meter
• Theory: Electric Apparatus
• Power Source: AC
• DC Voltmeter Type: Electrostatic
• AC Voltmeter Type: Electric
• Customized: Customized
• AC Ammeter: AC 0~5A
• DC Ammeter: DC 0~5A
• DC Voltmeter: DC 0~600V
• Accuracy Grade: Class 0.5
• Transport Package: PCB
• Specification: 96*48
• Trademark: DGG or no brand or OEM
• Origin: Zhejiang
• HS Code: 9030331000

Product Description

Chapter 1. General introduction

The 3U(3I) combined meter is used to measure and display the direct digital reading of voltage/current value in the three-phase electrical line. The UIF combined meter is used to measure and display the direct digital reading of voltage, current, and frequency values in the single-phase electrical line. One meter can finish the measuring tasks of three common meters.

Chapter 2.Model and definition


Input specification of voltage: AC 100V, 220V, 380V, or 500V (external PT is necessary if more than 500V)
Input specification of current: AC 1A or 5A, external CT is necessary if more than 5A
Frequency of input signal: 45 ~ 65Hz
Accuracy grade: Class 0.5
Auxiliary power supply: AC220V ± 10% 50/60Hz

Chapter 3.General parameters
 

AC ammeter	AC 0~5A, external CT is necessary if more than 5A("input 10A directly" can be customized)
DC ammeter	DC 0~5A, the external shunt is necessary if more than 5A("input 10A directly" can be customized)
AC voltmeter	AC 0~600V, external PT is necessary if more than 600V
DC voltmeter	DC 0~600V
Accuracy grade	class 0.5
Measuring mode	True RMS measurement
Alarm output	relay contact output,contact capacity AC 250V/1A;DC 30V/1A,resistive load
Communication interface	RS485 serial communication, MODBUS-RTU communication protocol
Transmitting output	linearity 0.5%, load resistance: output current≤300Ω, output voltage≥1KΩ, which are electrically isolated with the input signal and the auxiliary power supply
Switch input	dry contact input