Gw9-24 Series Outdoor High-Voltage AC Single Pole Isolation Disconnect/Disconnector Medium Voltage Switch

• Customization: Available
• Type: High-voltage
• Structure: Three-column Disconnector
• Model NO.: GW9
• Operation: Electric
• Grounding Mode: Grounding
• Movement Mode: Horizontal Rotary Type
• Number of Poles: Three Pole
• Structure of Operating: Electric
• Rated Frequency: 50Hz
• Rated Voltage: 12kv
• Rated Current: 400 , 630A
• Rated Peak Withstand Current: 40 , 50ka
• Transport Package: Export Box
• Trademark: DGG
• Origin: China
• HS Code: 853530900
• Production Capacity: 10000PCS/Yea
• Package Size: 80.00cm * 25.00cm * 45.00cm
• Package Gross Weight: 50.000kg
• Lead Time: 15 days (1 - 100 Pieces) ; To be negotiated ( > 100 Pieces)

Product Description

Our factory

We are professional manufacturer of current transformer ,voltage transformer, Vacuum Circuit Breakers/Recloser,Isolation switches,Dropout Fuse Cut-out,Lightning Arresters,High and Low Voltage Cabinets,Metering Devices,Power Distribution Transformers  etc.

GENERAL

GW9-24 series outdoor high-voltage AC single pole isolation switches (hereinafter referred to as "isolation switch") are outdoor high-voltage power distribution equipment with a rated voltage of 24kV and three-phase AC 50Hz, which are applicable to 20kV high-voltage transmission lines to cut off and close single-phase or three-phase circuits without load and voltage.

The rated current of the isolation switch is 200A, 400A, 600A, and 1000A.

The isolation switch is composed of a low-voltage, porcelain post insulator, a conductive part, and a mechanical part. The knife switch structure is adopted for opening and closing to cut off and close the electrical circuit. Each phase of the knife switch is composed of two conductive blades. Compression springs are installed on both sides of the blade. The contact pressure required for the knife switch can be obtained by adjusting the height of the spring. When the isolation switch is opened and closed, the insulating hook bar operating mechanism can be opened and closed. The disconnector has no self-locking device.

Isolation switches are generally suitable for transformers on three-phase line systems. The utility model has the advantages of simple structure, beautiful appearance, simple operation, and maintenance.
The isolation switch shall comply with the technical standards such as High Voltage AC Disconnectors and Earthing Switches (GB/T 1985-2004) and Technical Conditions for Ordering AC High Voltage isolation switches and Earthing Switches (DL/T 486-2000).


MODEL AND MEANING

USAGE: ENVIRONMENTAL CONDITIONS

1. The altitude does not exceed 3000m.
2. The ambient air temperature: Maximum:+40ºC; Minimum:-30ºC, Paramos:-40ºC
3. The wind pressure does not exceed 700Pa. (corresponding to 34m/s wind speed).
4. Atmospheric relative humidity: Dailly average does not exceed 95%, Monthly average does not exceed 90%
5. The installation site of an ordinary type isolator should be kept away from gas, smoke chemical deposition,salt-spray fog, dust, and other explosive and corrosive matters that affect seriously the insulation and conduction capability of the isolator.
7. Pollution-proof type isolator is applied to severe filthy conduction areas; however, it shouldn't be any explosive matters and matters causing a fire.


TECHNICAL PARAMETERS
 

NO.	ITEM		UNIT	DATA
1	Rated frequency		Hz	50
2	Rated voltage		kV	12
3	Rated current		A	400 , 630
4	Rated Short-time Withstand Current		kA	16 , 20
5	Rated Peak Withstand Current		kA	40 , 50
8	Rated Short-time Withstand Current Continuous Time		s	4
9	1 min Power Frequency Withstand Voltage		kV	65/79 (Fracture)
10	Rated Lightning Impulse Withstand Voltage		kV	125/145 (Fracture)
11	Mechanical Life		Times	2000
Note: If the altitude is over 1000m, the rated insulation level should be modified as appropriate.

OUTSIDE APPEARANCE AND INSTALLATION DIMENSION
Test Reports
All products have undergone professional testing and certification.
Our Customer

Our customers are located all over the world

Photos of Product