Our factory
We are professional manufacturer of current transformer ,voltage transformer, Vacuum Circuit Breakers/Recloser,Isolation switches,Dropout Fuse Cut-out,Lightning Arresters,High and Low Voltage Cabinets,Metering Devices,Power Distribution Transformers etc.
GENERAL
This type of voltage transformer adopts epoxy-resin vacuum casting, assembled by 4 single-phase winding is applicable for power systems of rated frequency 50Hz or 60Hz and rated voltage up to and including 10kV, used for electric energy metering and voltage measurement. The product can effectively eliminate the frequency division, power frequency, and high-frequency resonance, will not be burned, and has a strong anti-ferromagnetic resonance and short circuit resistance.
It complies with the standards IEC61869 -1 & 3, GB 20840.1-2010
Instrument transformers-Part 1: General requirements, GB 20840.3-2013
Instrument transformers-Part3:Additional requirements for inductive voltage transformers, and
JJG 314-2010 Instrument Voltage Transformers.
USAGE ENVIRONMENTAL CONDITIONS
1. Altitude: should not exceed 1000m
2. Ambient temperature:-5ºC ~ +40ºC
3. Air relative humidity:≤ 85%
4. Air relative site: indoor.
TECHNICAL PARAMETERS
1. Insulation level:12/42/75kV, 7.2/30/60kV
2. Power factor:cosφ= 0.8
3. Rated frequency:50Hz or 60Hz
4. Weight: 21kg
TECHNICAL RATIO
| Rated voltage ratio(kV) |
Accuracy class |
Rated output(VA) |
Limit output(VA) |
| 6/√3/0.1/√3/0.1 |
0.2/6P (3P) |
3*15/100 |
600 |
| 10/√3/0.1/√3/0.1 |
600 |
| 6/√3/0.1/√3/0.1/√3/0.1 |
0.2/0.5/6P (3P) |
3*10/3*10/100 |
600 |
| 10/√3/0.1/√3/0.1/√3/0.1 |
600 |
Note: If the parameters requested by the user are beyond the scope of the above table, they can be determined after consultation with the company
OUTLINE AND INSTALLATION DIMENSIONS
Our Customer
Our customers are located all over the world.
Test Reports
All products have undergone professional testing and certification.
Photos of Product
Audited Supplier 
){kind=link}
){kind=link}