(H) RW12-12 (F) Current Limiting Power Ceramic Series Outdoor High-Voltage AC Drop-out Fuse with Cutout Holder

• Customization: Available
• Breaking Capacity: High
• Type: Expulsion Drop-out
• Model NO.: (H)RW12
• Usage: High Voltage
• Fusing Speed: FF
• Fusing Device: Fuse Holder
• Standard: Kema/IEC/ANSI/IEEE
• Voltage: 10-38kv
• Rated Frequency: 50Hz
• Creepage Distance: Not Less Than 372 (E-Level)mm
• Usage Life: Not Less Than 20 Years
• Transport Package: Export Carton
• Trademark: DGG
• Origin: China
• Production Capacity: 500, 000
• Package Size: 50.00cm * 25.00cm * 15.00cm
• Package Gross Weight: 10.000kg
• Lead Time: 10 days (1 - 100 Pieces) ; To be negotiated ( > 100 Pieces)

Product Description

Our factory

We are professional manufacturer of current transformer ,voltage transformer, Vacuum Circuit Breakers/Recloser,Isolation switches,Dropout Fuse Cut-out,Lightning Arresters,High and Low Voltage Cabinets,Metering Devices,Power Distribution Transformers  etc.


General

(H) RW12-12 (F) outdoor high voltage AC drop fuse (hereinafter referred to as "fuse") is applicable to the outdoor overhead distribution systems with a rated frequency of 50Hz and rated voltage of 10kV. It is used as a protective element of circuit or electrical equipment in case of overload or short circuit fault of a power system. When traveling normally, the fuse is connected in series in the power line, the fuse is in a tensioned state, and the movable joint is locked. When the line fails, the fault current causes the fuse to blow, the movable joint is released, the fuse tube is quickly dropped, and the circuit is cut off, which plays a role in safety protection for the maintenance of the line and equipment. The load type fuse is added with elastic contact and arc extinguishing cover on the basis of the ordinary type, which is used to open and close the load current in the power system.

The fuse shall comply with technical standards such as GB / T 15166.3 - 2008 high voltage AC fuses - Part 3: injection fuses, DL / T 640 - 1997 outdoor AC high voltage drop tested fuses and fuse links ordering technical conditions.


Model And Meanings

Main Advantages

1. The insulator is made of high-strength ceramic or imported silicone rubber insulation material, with large creepage distance design, pollution resistance and environmental adaptability, and excellent insulation performance, which meets the requirements of long-distance travel in high sea wave areas.
2. The upper contact adopts a silver pair design, and the contact stainless steel spring provides contact pressure to ensure good conductive contact, and the contact resistance is very small, no more than 300mW.
3. The lower contact adopts a silver pair design, which provides a pair of current paths and is not connected with the bare foot of the hinge shaft.
4. The fuse tube adopts an epoxy phenolic glass cloth tube with fiber lining with a special anti-ultraviolet coating, which has excellent anti-ultraviolet performance.
5. The parallel groove coupling is made of cast brass. Even if the dimensions are inconsistent, the connection becomes very simple due to the provision of two conduits.
6. The trunnion is made of high-strength cast bronze and silver plated on the surface. It is pressed on the surface of the hinge to ensure that the closing is aligned with the fuse tube.
7. The design of the baffle fully meets the rapid separation of the end, the cable strand pops up quickly, and the force transmitted to the fuse can be reduced when closing.
8. The collar joint ensures reliable tripping after cutting off.
9. The rated current of the fuse of the same family is large, up to 200A, and the breaking capacity can be strong, up to 16A.
10. According to the user's requirements, a fixed device for power inspection and grounding can be added to facilitate the user's power inspection and grounding operation.

Technical Parameters
 

No.	Item		Unit	Parameters
1	Rated Frequency		Hz	50
2	Rated Voltage		kV	12
3	Rated Current for Fuse of the same family		A	≤100	≤200
4	Rated Breaking Current		kA	12.5	16
5	Rated Short-Time Power Frequency Withstand Voltage	To Earth (Dry / Wet)	kV/min	42/1
		Fracture (Dry / Wet)		48/1
6	Lightning Impulse Withstand Voltage	To Earth	kV	75
		Fracture		5
7	Creepage Distance		mm	Not less than 372 (e-level)
8	Mechanical Life		Times	500
9	Usage Life		Years	Not less than 20
Note: If the altitude is over 1000m, the rated insulation level should be modified as appropriate.

Outline And Installation Dimension
Our Customer

Our customers are located all over the world.


Test Report

We have test reports for drop type fuse products that have been validated by KEMA Laboratory:
Photos of Product