11kv, 33kv, 42kv, 51kv Three-Phase Outdoor Ceramic Surge Lightning/Lighting Arrester/Arrestor

• Type: Power Source Arrester
• Structure: Valve Type Arrester
• Installation: Parallel Arrester
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Y5WZ/R
• Application: Power Plants
• Size: Small
• Operation Voltage: High Voltage
• Shape: Gyro Type
• Material: Ceramic
• Certification: ISO9001, CCC
• Altitude: No More Than 3000 M
• Power Frequency: 50 ± 2Hz; 60±2Hz
• Maximum Wind Speed: 35m/S
• Cleaning-Free Conditions: Areas with Medium Pollution and Below
• Transport Package: PCB
• Trademark: DGG or no brand or OEM
• Origin: Zhejiang - China
• Production Capacity: 100000PCS/Year
• Package Size: 10.00cm * 15.00cm * 45.00cm
• Package Gross Weight: 6.000kg
• Lead Time: 10 days (1 - 10 Pieces) ; To be negotiated ( > 10 Pieces)

Product Description

Photos of Product

Lightning  Arrester

The lightning arrester is the basis for insulation coordination of various electrical equipment (such as transformer, reactor, capacitor, generator, motor, PT, CT, circuit breaker, contactor, etc.) in the power system. The internal and external insulation indexes (short-time power frequency withstand voltage, lightning impulse withstand voltage, operation impulse withstand voltage, etc.) of all electrical equipment in the power system are determined by the protection performance of the lightning arrester.

Purpose And Executive Standard

This product is used in power generation, transmission, transformation, and distribution systems of AC 220kV and below, and is used to limit the amplitude of lightning and internal switching overvoltage of the system to the specified level. It is the basic equipment for insulation coordination of the entire system. At the same time, this product cannot be used to limit resonance overvoltage, and other methods are required for system harmonic elimination.
The model of this product is prepared in accordance with JB/T 8459-2006 Preparation Method of Arrester Product Model and gapless products shall comply with GB 11032-2000 AC Gapless Metal Oxide Arrester;

The products with gaps shall comply with the standard of Metal Oxide Surge Arresters with Series Gaps (J B/T 9672-2005).
Important parameters and configuration methods not clearly defined in the above standards shall be corrected according to the requirements of DL/T 620-1997 Overvoltage Protection and Insulation Coordination for AC Electrical Installations.


The Normal Use Conditions of Conventional Products Are As Follows:

1. Ambient temperature: no higher than+40 ºC, no lower than - 40 ºC;
2. Altitude: no more than 3000 m;
3. Power frequency: 50 ± 2Hz; 60±2Hz; 
4. Maximum wind speed: 35m/s;
5. Cleaning-free conditions: areas with medium pollution and below;
6. For gapless products, the power frequency voltage applied for a long time shall not exceed the continuous operation voltage of the arrester;
7. For products with gaps, the short-time power frequency voltage rise at the installation point shall not exceed the rated voltage of the arrester.

If the arrester is used for a long time under the following abnormal conditions, it shall be specially made, and it shall be stated when ordering:

1. The temperature or altitude exceeds the standard (such as plateau, tropical zone, cold zone, fully enclosed cabinet, close to an electric furnace, etc.);
2. The use environment has serious moisture or corrosive gas impurities (such as water, salt fields, chemical plants, etc.);
3. Strong ultraviolet radiation (such as plateau, drought area with strong sunshine, etc.);
4. Extremely polluted areas (such as mine working face, construction site working face, etc)

Model And Meaning



Outline  And Installation  Dimension