(H) RW10 - 40.5 Series Outdoor High-Voltage Porcelain/Ceramics Current Limiting Drop-out Fuse with Cutout Holder

• Customization: Available
• Breaking Capacity: High
• Type: Expulsion Drop-out
• Model NO.: (H)RW10-40.5
• Fusing Speed: FF
• Fusing Device: Fuse Holder
• Standard: Kema/IEC/ANSI/IEEE
• Voltage: 10-38kv
• Rated Frequency: 50Hz
• Cut off The Maximum Short-Circuit Curren: 20ka
• Overvoltage Multiple Shall Not Exceed: 2.5times
• Transport Package: Export Carton
• Trademark: DGG
• Origin: China
• HS Code: 8535100000
• Production Capacity: 500, 000
• Package Size: 50.00cm * 40.00cm * 25.00cm
• Package Gross Weight: 10.000kg
• Lead Time: 15 days (1 - 100 Pieces) ; To be negotiated ( > 100 Pieces)

Product Description

Our factory

We are professional manufacturer of current transformer ,voltage transformer, Vacuum Circuit Breakers/Recloser,Isolation switches,Dropout Fuse Cut-out,Lightning Arresters,High and Low Voltage Cabinets,Metering Devices,Power Distribution Transformers  etc.

GENERAL

(H) RW10 - 40.5 outdoor high-voltage current limiting fuse (hereinafter referred to as "current limiting fuse") is an outdoor high-voltage protection appliance, which is applicable to the power system with AC 50Hz and rated voltage of 35kV and is used for overload and short circuit fault protection of power transformers and power lines.

The fuse shall comply with GB/T 15166.2-2008 High Voltage AC Circuit Breakers - Part 2: Current Limiting Fuses and other technical standards.


MODEL AND MEANINGS

USAGE ENVIRONMENTAL CONDITIONS

1. Altitude: ≤ 1000 m. If the altitude is higher than 1000m, the rated insulation level shall be corrected accordingly.
2. Ambient air temperature: maximum 40ºC, minimum - 25ºC, daily temperature difference 25k
3. Temperature: daily average relative humidity ≤ 95%, monthly average relative humidity ≤ 90%
4. Solar auxiliary radiation intensity: 0.1W/cm²
5. Icing thickness: not more than 10mm
6. Earthquake resistance: horizontal acceleration 0.3g
7. Outdoor Wind speed (Wind pressure): 35m/s (700Pa)
8. Pollution level: e-level


MAIN ADVANTAGES

1. The insulating porcelain sleeve or silicone rubber composite sleeve is designed with a large creepage distance, strong pollution resistance, and environmental adaptability, and good insulation performance, which can meet the operation requirements in high-altitude areas.
2. Fuse tube replacement is simple and convenient.
3. Good fast fusing performance and large breaking capacity.

TECHNICAL PARAMETERS
 

No.	Item		Unit	Parameters
				(H)RW10-40.5/0.5-20	(H)RW10-40.5/2-20	(H)RW10-40.5/(3~10)-20
1	Rated Frequency		Hz	50
2	Rated Voltage		kV	40.5
3	Rated Current for Fuse of the same family		A	0.5	2	3~10
4	Breaking Current (Three-Phase)		MVA	1000	200
5	Cut off the maximum short-circuit current limit		kA	20
6	Rated 1 min. Power Frequency Withstand Voltage		kV	95 (To Earth)
				118 (Fracture)
7	Rated Lightning Withstand Voltage		kV	185 (To Earth)
				215(Fracture)
8	Overvoltage multiple shall not exceed		Times	2.5
9	Creepage Distance		mm	Not less than 1256 (e-level),  Not less than 1013 (d-level)
10	Mechanical Life		Times	500
11	Protected object			Voltage Transformer		Power Lines
Note: If the altitude is over 1000m, the rated insulation level should be modified as appropriate.

OUTLINE AND INSTALLATION DIMENSION  
Test Reports
We have test reports for drop type fuse products that have been validated by KEMA Laboratory:
Photos of Product