Chapter 1.General introduction
The 3U(3I) combined meter is used to measure and display the direct digital reading of voltage/current value in the three-phase electrical line.The UIF combined meter is used to measure and display the direct digital reading of voltage,current and frequency value in the single-phase electrical line.One meter can finish the measuring tasks of three common meters.It can support the analog output,alarm,RS4485 communication function by the installation of different function modules.And it can also select the multiple functional modules at the same time to make it with the alarm,transmitting and communication functions.
Chapter 2.Model and definition
Chapter 3.General parameters
Input specification of voltage |
AC 100V,220V,380V or 500V (external PT is necessary if more than 500V) |
|
Input specification of current |
AC 1A or (external CT is necessary if more than 5A) |
|
Frequency of input signal |
45~65Hz |
Accurancy grade |
class 0.5 |
Alarm output |
relay contact output,contact capacity AC 250V/1A;DC 30V/1A,resistive load |
Communication interface |
RS485 serial communication,MODBUS-RTU communication protocol |
Transmitting output |
linearity 0.5%,load resistance:output current≤300Ω,output voltage≥1KΩ,which are electrical isolated with the input signal and the auxiliary power supply |
|
Switch input |
dry contact input |
|
|