Factory Price (H) RW11-12 (F) Series Current Limiting Porcelain High Voltage Speed Fuses Drop out Ceramic Fuse Cutout with Holder

• Customization: Available
• Breaking Capacity: High
• Type: Expulsion Drop-out
• Model NO.: (H)RW11
• Fusing Speed: FF
• Fusing Device: Fuse Holder
• Standard: Kema/IEC/ANSI/IEEE
• Voltage: 10-38kv
• Rated Voltage: 12kv
• Creepage Distance: Not Less Than 300 (D-Level)mm
• Rated Frequency: 50Hz
• Rated Breaking Current: 12.5/16ka
• Mechanical Life: 500times
• Transport Package: Export Carton
• Trademark: DGG
• Origin: China
• Production Capacity: 500, 000
• Package Size: 48.00cm * 38.00cm * 20.00cm
• Package Gross Weight: 13.000kg
• Lead Time: 20 days (1 - 100 Pieces) ; To be negotiated ( > 100 Pieces)

Product Description

DGG High Voltage Prcelain/Ceramics Drop Out Fuse Cutout
 

Our Factory

 

We are professional manufacturer of Dropout Fuse Cutout, current transformer ,voltage transformer, Vacuum Circuit Breakers/Recloser,Isolation switches,Lightning Arresters,High and Low Voltage Cabinets,Metering Devices,Power Distribution Transformers etc.

We can customize production based on customer drawings, and all products come with testing reports and certificates. Among them, the Drop out fuse cutout have been certified by KEMA Labs.

Product Description

 

(H) RW11-12 (F) outdoor high voltage AC drop fuse (hereinafter referred to as "fuse") is applicable to the outdoor overhead distribution systems with a rated frequency of 50Hz and rated voltage of 10kV. It is used as a protective element of circuit or electrical equipment in case of overload or short circuit fault of a power system. When traveling normally, the fuse is connected in series in the power line, the fuse is in a tensioned state, and the movable joint is locked. When the line fails, the fault current causes the fuse to blow, the movable joint is released, the fuse tube is quickly dropped, and the circuit is cut off, which plays a role in safety protection for the maintenance of the line and equipment. The load type fuse is added with elastic contact and arc extinguishing cover on the basis of the ordinary type, which is used to open and close the load current in the power system.

The fuse shall comply with technical standards such as GB / T 15166.3 - 2008 high voltage AC fuses - Part 3: injection fuses, DL / T 640 - 1997 outdoor AC high voltage drop tested fuses and fuse links ordering technical conditions.

 

Specifications

Technical Parameter
 

No.	Item		Unit	Parameters
1	Rated Frequency		Hz	50
2	Rated Voltage		kV	12
3	Rated Current for Fuse of the same family		A	≤100	≤200
4	Rated Breaking Current		kA	12.5	16
5	Rated Short-Time Power Frequency Withstand Voltage	To Earth (Dry)	kV/min	42/1
		Fracture (Dry)		49/1
		To Earth (Wet)		30/1
		Fracture (Wet)		36/1
6	Lightning Impulse Withstand Voltage	To Earth	kV	75
		Fracture		85
7	Creepage Distance		mm	Not less than 300 (d-level)
8	Mechanical Life		Times	500
Note: If the altitude is over 1000m, the rated insulation level should be modified as appropriate.

Outline And Installation Dimension
 

Model And  Meanings

Advantages of the Product

 

1. The insulator adopts high-strength porcelain or imported silicone rubber insulation material with excellent insulation performance;
2. The fuse tube is made of epoxy phenolic glass cloth tube with fiber lining with anti-ultraviolet special coating, which has excellent anti-ultraviolet performance
3. The rated current of the same family of fuses is large, up to 200A, and the breaking capacity is strong, up to 16kA.

 

Test Report

We have test reports for drop out fuse cutout products that have been validated by KEMA Laboratory,And we also have ISO certificates.

 

 

Our Customer

 

Our company's products are exported to various parts of the world, mainly to countries such as Ghana, Gambia, Ethiopia, Philippines, South Korea, Bangladesh, Australia, Pakistan, Azerbaijan, Myanmar, etc. The quality and performance of the product have been praised by customers, and there have been no complaints from customers for so many years.

Our team designs the most cost-effective power solutions for our clients, and has participated in the design of their substation and distribution plans as well as overseas bidding. Successfully solved the problem of product requirements for customers.

 

Other Drop Out Fuse Cutout

FAQ

1.Q:Can you print my logo&design?
A:Yes we can print your logo , please send us your logo picture&artwork ,and have all texts outlined .Also please let us know printing size,color,method and position of the logo.
 

2.Q:Are you a factory or a trader?
A:We are a factory with over 20 years of production experience, supporting both OEM and ODM modes for customized production for customers.

3.Q:What is the minimum order quantity for your company?
A:Our company's minimum order quantity is greater than or equal to 1 unit.

4.Q:How can I get to your company?
A:Our company's address is No. 268 Weiqi Road, Leqing Economic Development Zone, Leqing City, Wenzhou City, Zhejiang Province.You can take a plane to Wenzhou Longwan International Airport or take the high-speed rail to Yueqing Station.

5.Q:How many ways of shipping ?
A:By sea(cheapest ,but slow); by express(DHL,FedEx,UPS...) ; by air

6.Q:What's the sample time and production time ?
A:Sample(in stock):10-15 days   Production time :30-50 days .

7.Q:How to get a sample ?
A:Some samples can be provided for free. If you can confirm that there will be a large order to purchase from our company, then you only need to pay for the shipping fee; Customized samples, please contact us for sample fees.