Digital Voltmeter Current AMP Electricity Harmonic Analysis Multifunctional Network Power Meter

• After-sales Service: Upon Request
• Warranty: Upon Request
• Installation: General Installation Meter
• Display: Digital
• Usage: Standard Electric Energy Meter
• Theory: Electric Apparatus
• Model NO.: AB
• Power Source: AC
• DC Voltmeter Type: Electrostatic
• AC Voltmeter Type: Electric
• Customized: Customized
• Rated Voltage Value: AC 100V, 400V
• Rated Current Value: AC 1A or 5A
• Frequency: 45 ~ 65Hz
• Network: 3-Phase 3-Wire, 3-Phase 4-Wire
• Power Consumption: < 5va
• Impedance: > 500 KΩ
• Transport Package: PCB
• Specification: 96*48
• Trademark: DGG or no brand or OEM
• Origin: Zhejiang
• HS Code: 9030331000

Product Description

Chapter 1. General introduction

On the basis of the conventional multifunctional network power instrument, it is added the measuring and display functions of the demand value, the maximum and minimum value, the average value, and the voltage and current harmonics (the total harmonic distortion rate, the odd/even harmonic distortion rate, the 2nd ~ 21st harmonic wave ratio). It is displayed by LCD screen. The instrument can also be installed by different function modules to support the analog quantity, higher or lower alarm, and RS485 communication function.

Chapter 2.Model and definition


Chapter 3.General parameters

Note: 1. When the shape is 2 or 9, they are with four-channel of switching input DI.
          2. When the shape is 3 or 7, they are with two-channel of switching input D1. (there are with no switching outputs when the output function code is D, M, N or S)
          3. When the shape is 3 or 7, there are with no electric pulse outputs. (can choose the electric pulse to instead of the two-channel of switching input D1)
 

Technical Parameters			Index
Input	Network		3-phase 3-wire, 3-phase 4-wire
	Voltage	Rated Value	AC 100V, 400V
		Overload	Consistent: 1.2 times Instantaneous: 2 times/30s
		Consumption	< 0.5 VA(each phase)
		Impedance	> 500 kΩ
	Current	Rated Value	AC 1A or 5A
		Overload	Consistent: 1.2 times Instantaneous: 2 times/30s
		Impedance	< 20 mΩ (each phase)
	Frequency		45 ~ 65Hz
Output	Electric Energy	Output mode	2-channel open-collector optical coupling pulse output
		Pulse constant	Active 10000imp/kwh Reactive 10000imp/kvarh
	Communication	Output mode	RS485
		Protocol	MODBUS_RTU
	Analog Quantity	Channel quantity	2 ~ 4 channels
		Output model	0 ~ 20mA, 4 ~ 20mA programmable
		Load ability	≤ 300Ω
	Switching Value	Channel quantity	2 ~ 4 channels
		Output mode	Normally open relay contact output
		Contract capability	AC 250V/1A (Resistance load)
	Switching value input		4 - channel passive dry contact input model
Measuring Accuracy	Voltage, Current		class 0.2
	Power		class 0.5
	Frequency		± 0.05 Hz
	Power Factor		± 0.01 PF
	Active electric energy		class 0.5
	Reactive electric energy		class 2.0
Power Supply	Scope		AC/DC 85 ~ 264V 50/60Hz AC220V ± 10%
	Power consumption		< 5VA
Environment	Temperature		Operation: -10 ~ 50ºC Storage: -25 ~ 70ºC
	Humidity		≤ 85% RH, free of wet and gas corruption

Chapter 4. Measurement and display

Phase-null voltage, phase-phase voltage
Each phase-current
Total active power, split phase active power
Total reactive power, split phase reactive power
Total apparent power, split phase apparent power
Total power factor, split phase power factor
Frequency
Positive active electric energy, negative active electric energy
Positive reactive electric energy, negative reactive electric energy
Positive Max. active demand value, negative max. active demand value
Positive Max. reactive demand value, negative max. reactive demand value
Current positive active demand value, current negative active demand value
Current positive reactive demand value, current negative reactive demand value
Max value of split phase voltage
Min value of split phase voltage
Average value of split phase voltage
Total harmonic distortion of split phase current
Total even harmonic distortion of split phase current
Total odd harmonic distortion of split phase current
2nd ~ 21st harmonic ratio of split phase current
Total harmonic distortion of split phase voltage
Total even harmonic distortion of split phase voltage
Total odd harmonic distortion of split phase voltage
2nd ~ 21st harmonic ratio of split phase voltage